Eneo HDR-5004AH1.0 - Manual (Page 12)

CH 1 Product Introduction
8. Number buttons
: If you press this button, it will be changed to full screen in live
viewing or playback If you want to go to 20ch, push the 10+ button twice. Also 10+
button is used for ‘Hold’ while Jog Shuttle action.
[Rear Panel]
button is used for Hold while Jog Shuttle action.
(※ In menu and password setting, it is automatically converted to number buttons)
9. Backup device
: You can use the versatile backup devices such as CD-RW and
DVD-RW.
11.AUDIO
OUT
8.RELAY
7.RS485
10. AUDIO IN
9.SENSOR IN
1. Cooling Fan
2. Video In: This receives images from SDI cameras(04) or any camera(04+).
1.FAN
2.VIDEO IN
3. LAN
4.SPOT
5. VGA
12.HDMI
6. POWER 13.Xbox
Extender
(option)
g ( ) y ( )
3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.
4. SPOT Out : To CRT 4:3 monitor for spot video.
5. VGA port: video output for analog RGB display
6. DC Power : DC12V 4.16A or up
7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
8. Relay out : This terminal blocks connect external electric devices to the product
( Warning Lamp and others) ( Warning Lamp and others).
9. Sensor In : This terminals can be connected to external sensors.
10. Audio In: RCA audio in terminals. You can record four channels at the same
time.
11. Audio Out: RCA audio out terminal.
12. HDMI : HDMI output for HD monitor
13. VGA Extender (option) : Connect EXTEND FTP cable to Receiver
12
※ For more details, refer to [CH 2. Installation Method and Cautions].