Eneo HDR-5004AH1.0 - Manual (Page 36)

CH 3 How to Use
2) Display
Configure and view VGA Resolution, Sequence Dwell Time and Display Configure and view VGA Resolution, Sequence Dwell Time and Display
control settings.
VGA resolution : You can choose the VGA Resolution from 1920X1080(60Hz),
1920X1080(50Hz), 1280X720(60Hz) and 1280X720(50Hz).
Sequence dwell time : You can adjust the dwell time upon full screen switching.
Display control : You can adjust the brightness, contrast, hue and saturation of output.
3) SPOT Control
Set the SPOT output .
You can set the SPOT output.
- CVBS : Choose NTSC or PAL
36
- Mode : Choose ‘Full’ or ‘Quad’.
- Sequence dwell time: Adjust the switching time.
- Switching : You can program the sequence time. If you want to just see ch1,
you set all box to ‘1’. You can make any useful sequence by this map.