Local user and administrator passwords – ATL Telecom IP-3062 PoE Professional IP Telephone User Manual
Page 44
Page 44
MOCET IP3062 Professional IP Phone Administrators' Guide
Chapter 7: Setting Up User and Phone
Security Features
After setting up your IP3062 phones on your network, users can place and answer calls
using the default configuration. However, you may require some security-related changes
to optimize your system for best results.
This chapter shows you how to update your configuration for the following security-related
features:
Local User and Administrator Passwords
Locking the Phone
Local User and Administrator Passwords
Several local settings menus are protected with administrator password. The phone will
prompt for administrator password before granting access to the menu options. The Web
Configuration Interface is protected by the user and administrator password and different
page will display depending on which is used. The default user name is
user, and the
default user password is
1111. The default administrator name is admin, and the default
administrator password is
1234. You should change the administrator password from the
default value.
Web Configuration Interface
To change the user or administrator password, navigate to
System tab. To change the
administrator password, you must log in to the Web Configuration Interface as an
administrator.
Local Phone User Interface
To change the administrator password, navigate to
Menu > Admin Setting, enter the
current administrator password, and select
Account Setting > Admin Name and Admin
Password.
To change the user password, navigate to
Menu > Admin Setting, enter the current
administrator password, and select
Account Setting > User Name and User Password.