ATL Telecom IP-3062 PoE Professional IP Telephone - Manual (Page 21)

Page 21
MOCET IP3062 Professional IP Phone Administrators’ Guide
Wireless Connection
You must connect the IP3062 phone with a dedicated USB Wi-Fi adapter, and configure
wireless setting before they can establish a connection to a wireless network.
To install a dedicated USB Wi-Fi adapter and change the wireless settings that may need
to be set up to connect your device to the Wireless LAN(WLAN), go to Chapter 12: Using
USB Wi-Fi Adapter to Connect to A WLAN.
Security and Quality of Service Settings
You have the option of using several layer-2 and layer-3 mechanisms that increase
network security and minimize audio latency. This section describes each of the network
security and quality of service options.
VLANs
A Virtual LAN (VLAN) can be used to seperate and assign higher priority to a voice VLAN
as a way of minimizing latency. IP3062 supports
Static method. The VLAN ID can be
manually set from the phone web or menu interface or from a configuration file. To change
this parameter, go to VLAN Menu.
802.1X Authentication
802.1X authentication is a technology that originated for authenticating Wi-Fi clients. It has
also been adopted for authenticating PCs and other devices in LAN deployments. To
change this parameter, go to 802.1X Menu.
QoS with DSCP
Differentiated Services Code Point (DSCP) is a field in an IP packet that enables different
levels of service to be assigned to network traffic. This is achieved by marking each packet
on the network with a DSCP code and appropriating it to the corresponding level of service.
To change this parameter, go to QoS Settings Menu.
IPSec
Internet Protocol Security (IPSec) is a protocol suite for securing Internet Protocol (IP)
communications by authenticating and encrypting each IP packet of a communication
session. It can be used in protecting data flows between a pair of hosts (host-to-host),
between a pair of security gateways (network-to-network), or between a security gateway
and a host (network-to-host). IP3062 supports IPSec in a host-to-host transport and in
network tunnel modes. To change this parameter, go to IPSec Tunnel Items Menu.
IP Communication Settings
When the phone has established network connectivity, it needs to acquire several IP
network settings to proceed with IP communication. These settings are typically obtained
automatically from a DHCP server.