Amped Wireless UA600EX - High Power Wireless-N 600mW Pro USB Adapter - Manual (Page 58)

UA600EX USER’S GUIDE
57
d. The channel of your wireless network may be congested. Change the channel of your wireless
network by configuring the settings on your wireless router.
e. If you have an original wireless adapter or Ethernet adapter that may be causing problems with your
wireless connection or making your wireless connection slow. To disable it:

Windows: Click Start, then Control Panel, then Device Manager. Under Network Adapters
locate your original wireless or wired adapter (not the Amped Wireless adapter). Right click
the adapter and select disable.

Mac: Click on the wireless icon in the top right corner of your desktop. Select Turn Airport
Off.
The Windows wireless utility states that my wireless connection has “limited connectivity”
a. You may have an incorrect IP address assignment.

For Windows XP and 2000: Open the Amped Wireless Utility and go to the General tab. Click
Renew IP.

For Windows 7 and Vista: Open the Windows wireless utility by clicking the wireless icon on the
bottom right corner. Right click the wireless network that you are connected to and click Status.
Click diagnose to allow Windows to reset your connection