Amer Networks WLO220T - Manual (Page 8)

8
Software
Update and manage the MOS image on the WLO. The WLO has a primary and a
secondary firmware image which can be used to test out new firmware. The WLO
will use the firmware based on the “next” boot option. To select another image to
boot with, click on the next, under the next boot selection column.
To update a firmware image:
Select the primary or secondary image to update.
Click on upgrade under the action column.
Browse to the firmware location on your pc.
Select the firmware file, example is wlo200t-4.8.1.img
Click on upload.
The firmware image will be uploaded to the device.
This process will take a few minutes to complete.
When completed, it will return to the main software images page.
The following will be displayed to prove the firmware has been updated.