Amer Networks WLO220T - Manual (Page 24)

24
Add Optimization Policy
The main purpose of the WLO is to log and optimize traffic flow. This optimization
process is configured in this step.
Most of the options in the Optimization Policy need to be created first, before you
can select them. Create the address, or services, or groups, or schedule, before you
create a policy.
The policy creation starts off with naming the rule.
Then you can choose to enable the policy.
Select any or another source address from the drop down menu.
Select any or another destination address from the drop down menu.
Then click on the traffic management tab.
Select one type of traffic from the following 2 choices:
Service or Application, from the drop down menu.
Select the action option. Permit, is used to prioritize or guarantee a connection.
Deny is used to block traffic.
Limit allows for the traffic shaping to occur.
Select the limit rate in kbps, based on:
Aggregate limit – used for the total combined connection bandwidth.
Per Connection – used for the total per user bandwidth.
Per Source – used with a specified source address only.
Per Destination – used with a specified destination address only.
Last click on scheduling & logging.