Amer Networks WLO220T - Manual (Page 22)

22
Optimization
This section allows you to setup and configure the traffic shaping rules on the WLO.
The options in this section allow you to further filter and control the traffic flow. The
ability to create address objects, services, and schedules is in this section.
Configuring application filtering and setting a schedule is also in this section. All
these options will be used to make the optimization policy to control the traffic flow.
Current Policies
This shows the current policy’s configured on the WLO. The policy order goes from
highest priority on the top, to lowest priority on the bottom. A policy listed in this
section, will use used before the default policy, which is normally to allow all. The
number of policy’s the WLO supports is unlimited. This is why you can set the
number of policy’s shown on the screen.
The enable button allows you to enable or disable a currently policy.
Click on the enable policy button, and select the policy you wish to modify. Then
select update to save the selection.