Administrators, Reset existing – Amer Networks WLO220T User Manual
Page 10
10
Reset Existing
By clicking reset, the device will be reset to factory default settigns.
These are 192.168.1.1. and admin for the login, and admin for the password.
Once the reset is clicked on, the system will take a few minutes to boot back up.
Administrators
Change the password used for management of the WLO. This included both SSH and
telnet management. There are 2 default user accounts, the main admin account.
This has full read / write access to the device. The other account is admin-r. This
account only has read access to the WLO. You can only use the 2 accounts to
manage the WLO. Select the account you want to modify from the drop down menu.
Then add the current password, followed by the new password. Click on apply when
finished.