3-3. port-based group – Amer Networks SS2GD8IP User Manual

Page 75

Publication date: Dec., 2010

Revision B1

3-3-3. Port-based Group

Function name:

Port-based Group Configuration

Function description:

It shows the information of the existed Port-based VLAN Groups. You can
easily create, edit and delete a Port-based VLAN group by pressing ,
and function buttons. User can add a new VLAN group by
inputting a new VLAN name.

Fig. 3-21

Parameter description:

VLAN Name:

The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, “

“ and “_” characters. The maximal

length is 15 characters.

Member Port:

This is used to enable or disable if a port is a member of the new added
VLAN, “Enable” means it is a member of the VLAN. Just tick the check
box (

;)

beside the port x to enable it.

Add new VLAN:

Create a new Port-based VLAN. Input the VLAN name and choose the
member by ticking the check box beside the port No., then, press the
button to have the setting taken effect.

Fig. 3-22