Amer Networks SS2GD8IP - Manual (Page 235)

Publication date: Dec., 2010
Revision B1
223
6. trunk
7. exit
8. alarm
9. events
10. end
11. ip
12. help
13. ip
14. history
SS2GD8IP(ip)# history 3
Command history:
13. ip
14. history
15. history 3
SS2GD8IP(ip)#
logout
Syntax:
logout
Description:
When you enter this command via Telnet connection, you would logout the system
and disconnect. If you connect the system through direct serial port with RS-232
cable, you would logout the system and be back to the initial login prompt when you
run this command.
Argument:
None.
Possible value:
None.
Example:
SS2GD8IP# logout
restore default
Syntax:
restore default
Description:
When you use this function in CLI, the system will show you the information “Do you
want to restore the default IP address?(y/n)”. If you choose Y or y, the IP address
will restore to default “192.168.1.1”. If you choose N or n, the IP address will keep
the same one that you had saved before.
If restoring default successfully, the CLI would prompt if reboot immediately or not. If
you press Y or y, the system would reboot immediately; otherwise, it would be back
to the CLI system. After restoring default configuration, all the changes in the startup
configuration would be lost. After rebooting, the entire startup configuration would