Amer Networks SS2GD8IP - Manual (Page 118)

Publication date:Dec., 2010
Revision B1 106
Function name:
Accesses
Function description:
This function is used to configure SNMPv3 accesses. The Entry index key are
Group Name, Security Model and Security level. To create a new access account,
please check button, and enter the access information then
check . Max Group Number : 14.
Fig. 3-63-5 SNMPv3 Accesses Configuration
Parameters description:
Delete:
Check entry then check button, the entry will be delete.
Group Name:
The term here is used for Group Name setting. The length of “Group
Name” string is restricted to 1-32.
Security Model:
The term here is used for the Security Model setting.There are four kinds
of choices.
any: Accepted any security model(v1|v2c|usm).
v1: SNMPv1.
v2c: SNMPv2c.
usm: User-based Security Model.
Security Level:
The term here is used for the Security Level setting. There are three
kinds of choices.
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
Read View Name:
The name of MIB view. Select “None”, this entry has no read right.
Write View Name:
The name of MIB view. Select “None”, this entry has no write right.