Amer Networks SS2GD8IP - Manual (Page 343)

Publication date: Dec., 2010
Revision B1
331
Appendix A Technical
Specifications
Features
• 2 fiber (SFP) switching ports are compliant with SX/LX..etc-LC.
• 8 Gigabit TP/SFP fiber are dual media ports with auto detected function.
• Non-blocking
store-and-forward shared-memory Web-Smart switched.
• Supports auto-negotiation for configuring speed, duplex mode.
• Supports 802.3x flow control for full-duplex ports.
• Supports collision-based and carrier-based backpressure for half-duplex ports.
• Any ports can be in disable mode, force mode or auto-polling mode.
• Supports Head of Line (HOL) blocking prevention.
• Supports broadcast storm filtering.
• Auto-aging with programmable inter-age time.
• Supports 802.1p Class of Service with 2-level priority queuing.
• Supports port sniffer function
• Programmable maximum Ethernet frame length of range from 1518 to 9600
bytes jumbo frame.
• Supports port-based VLAN, 802.1Q tag-based VLAN.
• Efficient self-learning and address recognition mechanism enables forwarding
rate at wire speed.
• Web-based management provides the ability to completely manage the switch
from any web browser.
• SNMP/Telnet interface delivers complete in-band management.
• Supports IEEE 802.1d Spanning Tree Protocol.
• Supports IEEE 802.1w Rapid Spanning Trees.
• Supports IEEE 802.1s Multiple Spanning Trees.
• Supports IEEE 802.1X port-based network access control.
• Supports ACL to classify the ingress packets to do permit/deny, rate limit actions
• Supports QCL to classify the ingress packets for priority queues assignment
• Supports IP-MAC Binding function to prevent spoofing attack
• Supports IP Multicasting to implement IGMP Snooping function.
• Supports 802.1p Class of Service with 4-level priority queuing.
• Supports 802.3ad port trunking with flexible load distribution and failover
function.
• Supports ingress port security mode for VLAN Tagged and Untagged frame
process.
• Supports SNMP MIB2 and RMON sampling with sampled packet error
indication.
• Supports Power Saving with "ActiPHY Power Management" and "PerfectReach
Power Management" techniques.
• Supports Link Layer Discovery Protocol (LLDP)
• Supports SSL and SSH for secure Management ((Optional by Project
Requirement, Refer to device’s FW v5.0x upper))
• Supports
TACACS+: (Optional by Project Requirement, Refer to device’s FW v5.0x
upper)