Allmand Brothers NL PRO II - Manual (Page 20)

20
Laydown Tower Lights - Stowage for Trailering
The light bar and fixtures must be stowed before trailering or transporting.
WARNING! Burn Hazard. The light fixtures become extremely hot during use.
Always use caution and heat - resistant gloves when handling the
Lights or allow to the lights to sufficiently cool down before
handling.
1. Ensure lights are off and tower is lowered to the full DOWN position; see Raising and lowering the
light Tower on page 44-4.
2. Rotate the light bar into the trailering / transport park position (in line with front of the trailer) and
tighten the tower lock knob.
3. Reposition the light fixtures for trailering / transport by pulling them by facing the fixtures toward
the mast. (see below)
4. Lower mast into rear tower support and engage tower lock.
NOTE: If lights are to be removed for trailering / transporting, see Tower Llghts - Removal for
trailering / transporting (Optional) on page 21.
TRAILERING, TRANSPORTING AND LIFTING