Alinco DJ-500 - Manual (Page 57)

41
SET MODE OPERATIONS
Display Mode
This parameter determines the LCD display mode. This parameter may not be available for dealer-
programmed radios.
1.Pressing and holding
[PF2] key to turn on the radio to enter the Set mode.
2.Press / key to choose menu 01 and display " DSP".
3.Turn the main dial to select the desired parameter.
FREQ: channel frequency + channel number display
CH: channel number display.
NAME: Channel name+ Channel number display
4.Press key or key to confirm and exit.
RESET
In case the radio is malfunctioning or you may resume the default conditions of the
radio, please perform this factory reset.
1.Pressing and holding [PF2] key to turn on the radio to enter the Set mode.
2.Press
/ key to choose menu 02 and display " RESTOR".
3.Turn the main dial to select the desired parameter.
FACT: Restore factory default
INIT: Restore custom parameters only to default leaving the memory
OFF: Do not perform reset