Advanced operations, Offset frequency, Editing channel name – Alinco DJ-500 User Manual
Page 46
30
ADVANCED OPERATIONS
Offset Frequency
1.After pressing
key, the top left corner of LCD displays " " then press
key.
2.Press
/
key to choose menu 11 and display "
OFF SET".
3.Turn main dial to choose the desired Offset frequnecy.
Available parameters are 0.00 to 69.9975MHz in step size selected in menu 07.
4.Press
key or
key to confirm end exit.
3.Turn main dial to choose the desired parameter.
TX=RX: talk around enables
OFF: talk around disables
4: Press
key or
key to confirm end exit.
Editing Channel name
1. Press
key, the top left corner of LCD displays " " icon, then press
key.
2. Press
/
key to choose menu 12 and display "
NAME".
3. Rotate channel switch to choose desired character, press
key to confirm current
character and move shift to next character. Press
key back to the previous
character.
4. Press
key or
key to confirm and exit.
NOTE: This feature is available only in the Channel modes.