Alinco DJ-500 - Manual (Page 55)

39
ADVANCED OPERATIONS
NOTE: When current channel add 5TONE to be optional signaling, LCD displays 5TONE self ID code,
otherwise displays DTMF self ID code.
Tone Pulse Frequency
This function is used for waking up sleeping repeater, it needs a certain intensity of Tone Pulse to wake up
sleeping repeater. In general, as long as the repeater has been waked up, no need to transmit Tone Pulse
again in preset time.
1. Press
key, the top left corner of LCD displays " " icon, then press key.
2. Press / key to choose menu 29 and display " TBST".
3. Rotate channel switch to choose desired setup.
1750HZ, 2100HZ, 1450HZ, 1000HZ, 4 kinds of Tone Pulse for optional
4. Press key or key to confirm and exit.
Battery Save
User can setup battery save ratio according to requirements. The standby time can be extended when
enable battery save function, but if save ratio setting too high, it may cause voice missing.
1. Press
key, the top left corner of LCD displays " " icon, then press key.
2. Press / key to choose menu 30 and display " SAVE".
The ID code displaying on LCD is transceiver self ID code.
4. Press key or key to confirm and exit.