Alinco DJ-500 - Manual (Page 37)

21
NOTE: This feature is available only in the Channel modes.
ADVANCED OPERATIONS
NOTE:
Turn the main dial clockwise or counter-clockwise to change scan direction.
Channels selected as "skip channels" won't be scanned during the channel scanning.
Scan Channel Skip
In Channel mode, after pressing key, press key to set the current channel
to be skipped while channel-scanning, and ' S' icon appears to indicate the channel
is set as the skip. Repeat the operations to cancel channel scan skip setting. The S
icon will dessapear.
explained later. Default is timed and resumes scanning after 5 seconds regardless of receiving state.
1.Frequency Scan
In VFO mode, it scans in accordance with the channel step. Press any key except
or keys to
stop scanning.
2.Channel Scan
In channel mode, it scans in accordance with preprogrammed channels. Press any key except
,
or keys to stop scanning.
3.FM Search
In FM broadcast receiver mode, it scans in accordance with 100KHz step. Press any key except
,
or keys to stop scanning.