Advanced operations, Signaling combination, Frequency step – Alinco DJ-500 User Manual
Page 44
28
Signaling Combination
You may combine the signaling functions of different system.
1.After pressing
key, the top left corner of LCD displays " " then press
key.
2.Press
/
key to choose menu 06 and display "
SIGNAL".
3.Turn main dial to choose the desired signaling combinations mentioned below.
SQ: Hear all communications regardless of the signaling tones.
CT/DCS: Hear only the signals with matching CTCSS or DCS tones.
Tone: Hear only the signals with matching DTMF, 5-Tone tones.
CT&TO: Hear only the signals with matching CTCSS, DCS, DTMF, 5-Tone tones.
CT/TO: Hear only the signals with matching any one of CTCSS, DCS, DTMF,
5-Tone tones.
4.Press
key or
key to confirm and exit.
ADVANCED OPERATIONS
Frequency Step
1.After pressing
key, the top left corner of LCD displays " " then press
key.
2.Press
/
key to choose menu 07 and display "
STEP".
3.Turn main dial to choose the desired step mentioned below.
4. Press
key or
key to confirm end exit.
Available steps are 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K and 50KHz.
This parameter is not available when the radio is in the Channel mode.