Airmar LB150 User Manual
Page 56

LB150 WeatherStation Technical Manual revision 0.013
Proprietary and Confidential
PRELIMINARY - DRAFT
53
$PAMTR,EN,19,1,DTM,1,10*17
$PAMTR,EN,19,2,GGA,1,10*17
$PAMTR,EN,19,3,GLL,0,10*13
$PAMTR,EN,19,4,GSA,0,10*00
$PAMTR,EN,19,5,GSV,0,10*10
$PAMTR,EN,19,6,HDG,0,5*2C
$PAMTR,EN,19,7,HDT,0,5*22
$PAMTR,EN,19,8,MDA,1,10*19
$PAMTR,EN,19,9,MWD,1,10*0E
$PAMTR,EN,19,10,MWVR,1,5*75
$PAMTR,EN,19,11,MWVT,1,10*46
$PAMTR,EN,19,12,RMC,0,10*3B
$PAMTR,EN,19,14,VTG,1,10*21
$PAMTR,EN,19,15,VWR,0,10*37
$PAMTR,EN,19,16,VWT,1,10*37
$PAMTR,EN,19,17,XDRA,0,10*6D
$PAMTR,EN,19,18,XDRB,0,5*59
$PAMTR,EN,19,19,ZDA,1,10*3E
Keep in mind when enabling sentences that the overall bandwidth of the interface should
not be exceeded. At 4800 baud, only 480 characters can be transmitted in a one second
period of time. If every one of the above sentences were enabled for transmission, their
total number of characters could exceed 800. It is possible to use the $PAMTC,EN
command to overspecify the amount of data transmitted, beyond the bandwidth capacity
of the NMEA output channel. See section 2.1. for further information regarding bus
bandwidth.
Examples
Example 1:
To disable all sentences for transmission, except transmit compass heading 5
times per second, and save the settings in EEPROM, send the following sequence
of commands to the unit:
$PAMTC,EN,ALL,0
$PAMTC,EN,HDG,1,2
$PAMTC,EN,S
Example 2:
To reload the factory defaults for the $PAMTC,EN settings into EEPROM
without affecting other EEPROM settings (such as attitude offsets set with the
$PAMTC,ATTOFF command), send the following sequence of commands to the
unit:
$PAMTC,EN,LD
$PAMTC,EN,S