Airlink AML001 - Manual (Page 61)

PCI Modem Card User's Manual
60
+FTH=96 V.29. 9600 bits/s.
+FTH=73 V.17. 7200 bits/s.
+FTH=74 V.17 (short train). 7200 bits/s.
+FTH=97 V.17. 9600 bits/s.
+FTH=98 V.17 (short train). 9600 bits/s.
+FTH=121 V.17. 12000 bits/s.
+FTH=122 V.17 (short train). 12000 bits/s.
+FTH=145 V.17. 14400 bits/s.
+FTH=146 V.17 (short train). 14400 bits/s.
+FTM=—Transmit FAX Data with Carrier
+FTM= command causes the modem to transmit data using the
modulation defined as below.
+FTM=3 V.21 channel 2. 300 bits/s.
+FTM=24 V.27ter. 2400 bits/s.
+FTM=48 V.27ter. 4800 bits/s.
+FTM=72 V.29. 7200 bits/s.
+FTM=96 V.29. 9600 bits/s.
+FTM=73 V.17. 7200 bits/s.
+FTM=74 V.17 (short train). 7200 bits/s.
+FTM=97 V.17. 9600 bits/s.
+FTM=98 V.17 (short train). 9600 bits/s.
+FTM=121 V.17. 12000 bits/s.
+FTM=122 V.17 (short train). 12000 bits/s.
+FTM=145 V.17. 14400 bits/s.
+FTM=146 V.17 (short train). 14400 bits/s.
+FTS=—Transmission Silence
+FTS= causes the modem to terminate a transmission and wait for
x 10 ms before responding with the OK result code. For example,
= 5 results in a 50 ms interval. has a range of 0—255.
A.1.2 FAX Commands
+FAA=—Adaptive Answer
A service class 1 FAX DCE may have the ability to answer as a data modem
DCE or as a FAX DCE. It may also be able to change from class 1 FAX
mode to data modem operation in response to an incoming call.