Airlink AML001 - Manual (Page 47)

PCI Modem Card User's Manual
46
7 34666 kbits/s. 19 50666 kbits/s.
8 36000 kbits/s. 20 52000 kbits/s.
9 37333 kbits/s. 21 53333 kbits/s.
10 38666 kbits/s. 22 54666 kbits/s.
11 40000 kbits/s 23 56000 kbits/s.
+A8E=,,,—V.8 and V.8 bis Operation Controls
Use this command to set the control parameters for early call negotiation
through V.8 and V.8 bis. +A8E* may also be used as an action command to
reinitiate V.8 or V.8 bis if an earlier attempt to use either protocol has failed.
enables or disables DCE-controlled V.8 origination negotiation;
enables or disables DCE-controlled V.8 answer negotiation;
disables V.8 negotiation or sets it to DCE controlled or DTE controlled
negotiation.
The parameter sets the V.8 CI signal call function to the value
specified. The valid range for this parameter is 0—FF, with a default of 0xC1.
Valid Values:
1
Enables DCE-controlled V.8 origination negotiation (default).
6 Enables DCE-controlled V.8 origination negotiation, issue
+A8x indications.
Valid Values
1
Enables DCE-controlled V.8 answer negotiation (default).
5 Enables DCE-controlled V.8 answer negotiation, issue +A8x
indications.
Valid Values
1
Enables DCE-controlled V.8 origination negotiation.
6 Enables DCE-controlled V.8 origination negotiation, issue
+A8x indications.
Valid Values
0
Disables V.8 negotiation.
1 Enables DCE-controlled V8 bis negotiation (default).