AEC Single Conveying Units - Manual (Page 21)

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 20 of 36
Fine Adjustment of the Filling Level in the Conveyor Hopper
During operation, use a screwdriver to carefully turn the adjustment screw (A) of
the level sensor until the desired filling level is reached.
If the filling level in the conveyor hopper cannot be lowered far enough using the
level sensor, the pressure on the control and maintenance unit can be reduced
gradually.
Before the fine adjustment, carry through a basic adjustment.
Clockwise rotation makes the filling level fall.
Counter-clockwise rotation makes the filling level rise.