AEC Single Conveying Units - Manual (Page 16)

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 15 of 36
2-5 Electrical Connection
The operating voltage is 110 V, AC, PE, 50/60 Hz. Special voltages available by
request.
The connected load is approximately 15 W.
The connection is made using a mains connector. A separate protection of the
socket is not necessary.
Connect the plug of the sensor cable to the control unit.
Plug the main connector into a corresponding socket.
Check with the local electricity board for regulations.