AEC Single Conveying Units - Manual (Page 18)

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style 17 of 36
3-2 Control and Maintenance Unit
A. The unit is switched ON and OFF at the control and maintenance
unit.
B. At the regulator, the operating pressure is adjusted. A water
separator is integrated.
C. Regularly inspect the compressed air filter to make sure that it is
clean and functioning properly. Clean or replace this filter as
needed. For information, see Section 5-1: Maintenance.
Figure 5: Control and Maintenance Unit
B
C
A