ACTi Floor Planner V2.3.2 - Manual (Page 18)

www.acti.com
ACTi Floor Planner User’s Manual
18
NVR Servers
NVR servers are computer storage / processing clusters. They may be located in the same
map as the cameras they record or in different maps.
Setting up NVR servers: Go to the map you wish to insert NVR server to. Click the NVR tab in
Relation Setting section. Type in the name of NVR server, select the type and model number
of NVR server, and then click the green plus to add NVR to this map. The NVR server will be
added to the list below, denoting NVR servers for this map. Click on the red X beside
the NVR server to remove this NVR.
Switches
Switch is a computer networking device that connects network segments. Every camera,
NVR server, and CMS server needs to be wired to a switch in an Ethernet network. Switches
need to be located in the same map as the cameras, NVR servers, and CMS servers they
connect with.
Setting up Switches: Select your target map. Go to the Relation Setting section and click on
the Switch tab. You may add switches on your own when choosing “I know how many
switches I should use ”. Type in the name of switch, and then click the green plus to add switch