Westermo TD-32 - Manual (Page 39)

39 6178-2203
S21 – General Bit Mapped Options Status (Read only register)
Bit Interval Default Description
0 0..1 0 Set by AT&J only for compatibility
1 0..1 0 Reserved
2 0..1 1 CT106 (CTS) Behaviour:
0-AT&R0 vald
1-AT&R1 vald
3..4 0..3 0 CT108 (DTR) Behaviour:
0-AT&D0 selected
1-AT&D1 selected
2-AT&D2 selected
3-AT&D3 selected
5 0..1 0 Reserverad
60..1 0 CT107 (DSR) Behaviour:
0-AT&S0 selected
1-AT&S1 selected
7 0..1 0 Long ”space” disconnect:
0-ATY0 selected
1-ATY1 selected
S22 – Speaker/Results Bit Mapped Options Status (Read only register)
Bit Interval Default Description
0..1 0..3 1 Speaker Volume:
0-Off (ATL0)
1-Low volume (ATL1)
2-Medium volume (ATL2)
3-High volume (ATL3)
2..3 0..3 1 Speaker control:
0-Disabled (ATM0)
1-Speaker on until carrier
has been detected (ATM1)
2-Always on (ATM2)
3-On only during handshake
(ATM3)
4..60..7 7 Extended result codes:
0-ATX0 selected
4-ATX1 selected
5-ATX2 selected
6-ATX3 selected
7-ATX4 selected
7 0..1 0 Reserved