Westermo TD-32 - Manual (Page 38)

38 6178-2203
S16 – General Bit Mapped Test Options Status (&T) (Read only register, not stored with &W)
Bit Interval Default Description
0 – 0 Local analogue loopback:
0-Disabled
1-Enabled (AT&T1)
1 0..1 0 Not used
2 0..1 0 Local digital loopback:
0-Disabled
1-Enabled (AT&T3)
3 0..1 0 RDL Status:
0-Modem not in RDL
1-RDL läge (AT&T4)
4 0..1 0 RDL statusrequest:
0-RDL not requested
1-RDL requested (AT&T6)
5 0..1 0 RDL with self-test:
0-Disabled
1-Enabled (AT&T7)
60..1 0 LAL with self-test:
0-Disabled
1-Enabled (AT&T8)
7 0..1 0 Reserved
S18 – Test Timer
Sets the length of time (&T) that the modem conducts a test. 0 gives unlimited time for testing.
Default 0 {0..255} (sec).
S19 – AutoSync Bit Mapped Options
Normally not editable by the user.
S20 – AutoSync HDLC Address or BSC Sync Character
Normally not editable by the user.