Westermo GS-01 - Manual (Page 44)

44 6195-2201
+CMGW – Write Message to Memory
This command stores a message to memory storage (either SMS-SUBMIT or
SMS-DELIVERS). The memory location is returned (no choice possible
as with phonebooks +CPBW).
The entering of text or PDU is done similarly as specified in command Send Message
+CMGS.
Command syntax in text mode: ( is returned in both cases)
AT+CMGW= [, [, ] ]
enter text
Command syntax in PDU mode:
AT+CMGW= [,]
give PDU
Response syntax: +CMGW:
or +CMS ERROR: if writing fails
Parameter Definition:
: Originating or Destination Address Value in string format.
: Type of Originating / Destination Address.
: Integer type in PDU mode (default 2 for +CMGW), or string type in text mode
(default ”STO UNSENT” for +CMGW). It indicates the status of message in memory.
If is omitted , the stored message is considered like a message to be send.
Defined values:
PDU mode Text mode
0 ”REC UNREAD”
1 ”REC READ”
2 ”STO UNSENT”
3 ”STO SENT”
: The length of the actual data unit in octets
Example:
Application to GSM AT+CMGW=”+33146290800” Write a message in
Hello, how are you? text mode
GSM to application +CMGW: 4 Message stored in
OK index 4
Application to GSM AT+CMGW= Write a message in
PDU mode
GSM to application +CMGW: Message stored in
OK