Westermo GS-01 - Manual (Page 40)

40 6195-2201
: set the rules for storing received CBMs (Cell Broadcast Message) types depend on
its coding scheme, the setting of Select CBM Types (+CSCB command)
and . Default is 0.
0 No CBM indications are routed to the TE. The CBMs are
stored.
1 The CBM is stored and an indication of the memory location
is routed to the customer application using unsolicited result
code: +CBMI: ”BM”,
2 New CBMs are routed directly to the TE using unsolicited
result code.
+CBM: (PDU mode)
or
+CBM:,, ,, (Text mode)
3 Class 3 CBMs: as =2.
Other classes CBMs: as =1.
for SMS-STATUS-REPORTs. Default is 0.
0 No SMS-STATUS-REPORTs are routed.
1 SMS-STATUS-REPORTs are routed using unsolicited code:
+CDS: (PDU mode)
or
+CDS: ,, [] , [], ,
Default is 0.
0 TA buffer of unsolicited result codes defined within this
command is flushed to the TE when 1...3 is entered
(OK response shall be given before flushing the codes)
1 TA buffer of unsolicited result codes defined within this
command is cleared when 1...3 is entered.
Application to GSM AT+CNMI=2,1,0,0,0 =1
GSM to application OK
GSM to application +CMTI: ”SM”, 1 Message received
Application to GSM AT+CNMI=2,2,0,0,0 =2
GSM to application OK
GSM to application +CMT:”123456”, Message received
”98/10/01,12:30:00+00”,
129, 4, 32, 240, ”15379”,
129,5
Received Message
Application to GSM AT+CNMI=2,0,0,1,0 =1
GSM to application OK
Application to GSM AT+CMGS=”+33146290800” Send a message in
Message to send text mode