Welltech WS 6600 V.2.0 - Manual (Page 62)

Welltech Computer Co., Ltd.
WellBilling 6600 62
has no answer.
Unconditional: When enabled, any calls to this subscriber will be
forward to this URI unconditionally. You can use SIP URI or
subscriber ID here.
Unavailable Forward: Forward to the URI when the subscriber is
unavailable (not registered). You can use SIP URI or subscriber
ID here. You can use SIP URI or subscriber ID here
Busy Forward: Forward to the URI when the subscriber is busy.
You can use SIP URI or subscriber ID here. You can use SIP
URI or subscriber ID here
Announcement Before Forward: Play Announcement before call
forward
181 for Call Forward: Send SIP181 for Call Forwarded service
Number Change: Change the original number to a new number.
Welltech IP Centrex 6850 is required for announcement service.
Find Me: Locate subscriber based on different time segment
when the original (registered) contact cannot be reached.
- Find Me Hunting First: Hunting find me contact first.
- Hunting Subscriber: Applicable only for Find me hunting
checked will hunt subscriber registered contact when find me
can’t be reached.
Auto Call Forward: Auto Call forward or not after number
changed
Call Pickup:
Group Pickup (Picked): Allow to be picked-up within group or
not
Global Pickup (Picked): Allow to be picked-up globally or not
Screening Service:
Personal ANI Screening: Personal ANI screening can be used
to filter the caller based on caller ID. For all TEL are set to allow
(full match), only on-list ANI can get through. For all TEL are set
to disallow, only on-list ANI will be screened. Otherwise,
“disallow” has higher priority than “allow”.
Personal DNIS Screening: Personal DNIS screening can be
used to limit the called prefix. For all TEL are set to allow (prefix
match), only on-list DNIS can get through. For all TEL are set to
disallow, only on-list DNIS will be screened. Otherwise,
“disallow” has higher priority than “allow”
Do Not Disturb: Up-to 2 time segments can be set to reject all
incoming calls.