Welltech WS 6600 V.2.0 - Manual (Page 59)

Welltech Computer Co., Ltd.
WellBilling 6600 59
Register Type: Subscriber register type
- Dynamic: Subscriber need send register message for
availability
- Predefine: Subscriber will be handle as a permanent user
Predefine UR11: Predefine subscriber UR11 (i.e.
sip:[email protected])
Predefine UR12: Predefine subscriber UR12 (i.e.
sip:[email protected])
- Predefine/NAT:
Subscriber will be handled as a permanent
NAT user (manual IP/Port mapping is required).
Predefine URI 1: Predefine NAT subscriber URI (i.e.
sip:[email protected]:7777)
Public TA: mapped NAT Server IP address and port
(i.e.61.218.42.217: 5060)
RTP Proxy: Use RTP Proxy or not
- Yes: Always use the RTP Proxy or not
- No: Always not use RTP Proxy
- Auto: Automatic decide to use RTP Proxy or not
(recommended)
- Recorder: Enable recorder service (WellRec 5600 is
required)
- Recording on Demand: Use Recorder on demand service
(WellRec 5600 is required and special CPE is required to
enable recording on demand silently (the remote side didn’t
aware the recording))
NAT Group: NAT group can be used for enterprise user. When
two subscribers have same NAT group defined, WellSIP 6500
will not use NAT Proxy when both subscribers have same NAT
group.
User Agent ID: User agent ID in UAC
Caller Info: Display calling parting information
- Caller TEL No: Use the original caller ID for display name
and FROM user.
- Registered TEL No: Use UAC for both display name and
FROM user (this is the default value)
-
Caller Display Name: SIP display name for original caller and
FROM user is the UAC user.
Max Register Time: The maximum register time when a user is
coming from public network
Max NAT Register Time: The maximum register time when a
user is sited behind NAT