Welltech WS 6600 V.2.0 - Manual (Page 14)

Welltech Computer Co., Ltd.
WellBilling 6600 14
Network
WellBilling 6600 comes with dual redundant 10/100/1000
Ethernet port. It is required to connect these 2 ports to different
switch for redundant network.
Step 1:
After successfully logon to the system, we need to change
the network configuration. Click Control > Network to setup
the network parameters as figure 2.2-1.
Figure 2.2-1
Step 2:
Enter the deserved IP address, Submask and default
gateway. Apply the change by clicking apply button as figure
2.2-2.
Figure 2.2-2
Step 3:
When screen shows “Change network configuration may
cause server disconnected, are you sure?” click OK button to
changes IP address as figure 2.2-3.