Welltech WS 6600 V.2.0 - Manual (Page 147)

Welltech Computer Co., Ltd.
WellBilling 6600 147
Chapter 14 Telnet & RS-232 Configuration
WellBilling 6600 also can support to be managed by Telnet or
Console port (RS-232) for basic operations.
Interface：
Network：TCP/IP Telnet (i.e. telnet 192.168.111.181 10086)
RS232:
- Connect using： COM1
- Baud Rate：9600
- Data bits：8
- Parity：None
- Stop bits：1
- Flow Control： None
- Wire： Null modem line (crossed)
Logon WellBilling 6600 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal
emulator to login (e.g. telnet 192.168.111.181:10086). User ID &
password will be required for login (default login user id: admin,
password: admin & user id: root, password: root).
Command List:
Command Description
echo Auto echo on or off
Event log Clean or show system log message
exit Quit the current session
Ip config Configure or show network1 information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time
Reset or show system time.
Time zone Setup or show system time zone
User admin Manage user account.
help & ?
View command list