Welltech SPCI2S Boards - Manual (Page 27)

Dialogic ® SPCI2S and SPCI4 Boards User Manual Issue 7
5 Hardware Installation
5.1 Warnings and Cautions
Refer to Section 1 Warnings and Cautions and Section 4.3
Essential Compliance Information before commencing installation.
Refer to any Warnings and Cautions and Compliance Information in
the documentation supplied with the Host Computer before
commencing installation.
CAUTION
The Dialogic ® SPCI2S and SPCI4 boards contain Electrostatic Sensitive
Devices (ESDs), which may be permanently damaged if incorrectly handled.
If a board is removed from the host computer it must be handled in
accordance with appropriate anti-static handling procedures. Refer to:
EN100-015 Part 1 Basic Specifications: Protection of Electrostatic Sensitive
Devices: Part 1 General Requirements
for further details.
5.2 Unpacking
The SPCI2S and SPCI4 boards are supplied in anti-static packaging, and
should always be stored in its anti-static bag when not installed in a
computer.
Inspect the packaging for any signs of damage that may have occurred
during transit. In the event of damaged or missing items notify both the
carrier and the supplier immediately.
5.3 Identification
Two labels are applied to the non-component side of the main board
assembly.
The smaller of these labels shows the serial number in barcode and
alphanumeric formats.
The larger label contains the following information:
• Manufacturers name and country of origin
• The Equipment Type [ET: SPCI]
• The variant specific Product ID [SS7SPCI2SQ or SS7SPCI4Q]
• ACTA Product-Labeling number
• Industry Canada Registered number
• Other approvals symbols and/or text
27