3 hardware overview, 4 system requirements, 5 related documentation – Welltech SPCI2S Boards User Manual
Page 10: Hardware overview, System requirements, Related documentation

Section 2 Introduction
10
2.3 Hardware
Overview
The SPCI2S and SPCI4 boards are full length PCI boards with 33MHz 32 bit
PCI interface. The boards are Universal expansion boards capable of detecting
the host signaling environment in use and adapting themselves to either +5V
or +3.3V signaling environments.
Note: The distinction is the signaling protocol used and not the power rail to which board
connects.
Each board has an H.100 CT Bus interface, which is used to provide
connectivity to further boards or to other H.100 CT Bus compatible boards,
such as voice processing and fax cards.
The H.100 CT Bus supports 4096 channels (or timeslots) and the associated
clock and framing signals. Each board is capable of generating the CT Bus
clocks, or can act as a slave. CT Bus channels may be used individually or can
be grouped to provide a higher bandwidth data path. The signals are carried
between boards in a host computer using an H.100 CT Bus ribbon cable.
2.4 System
Requirements
To use the SPCI2S or SPCI4 signaling board, the host computer must meet
the following minimum specifications:
• This signaling board is for use only with UL listed computers that have
installation instructions detailing user installation of card cage
accessories.
• Rev. 2.1 PCI compliant computer system.
• One free 33MHz 32 bit PCI full size expansion slot.
2.5 Related
Documentation
• U03HSP - SS7 Boards Programmer’s Manual for SPCI2S and SPCI4
This document provides further information on the use of the board.
• 05-2300 - SS7G21 and SS7G22 Signaling Server Hardware Manual
This document provides full instructions on installing the board into
Dialogic
®
SS7G21 Signaling Server products.
• ECTF H.100 Hardware Compatibility Specification: CT Bus
This document provides further information on the H.100 CT Bus. This
document may be obtained from the ECTF web site:
http://www.ectf.org
• PCI local bus specification Rev. 2.1
This document provides further information on the PCI bus. It may be
obtained from the PCI-SIG web si