Watson-Marlow Qdos30 - Manual (Page 4)

Watson-Marlow qdos30 PROFIBUS Pump User Manual 4
2 Declaration of incorporation
Watson-Marlow Ltd
Falmouth
Cornwall
TR11 4RU
England
Declaration of Incorporation
In accordance with the Machinery Directive 2006/42/EC that if this unit is to be installed into a machine
or is to be assembled with other machines for installations, it shall not be put into service until the
relevant machinery has been declared in conformity.
We hereby declare that:
Peristaltic Pump qdos
Series: qdos 30
that the following harmonized standards have been applied and fulfilled for health and safety
requirements:
Safety of Machinery - EN ISO 12100
Safety of Machinery – Electrical Equipment of Machines EN 60204-1.
Quality Management System - ISO 9001.
and the technical documentation is compiled in accordance with Annex VII(B) of the Directive.
We undertake to transmit, in response to a reasoned request by the appropriate national authorities,
relevant information on the partly completed machinery identified above. The method of transmission
shall be by mail or email.
The pump head is incomplete and must not be put into service until the machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Directive.
Person authorized to compile the technical documents:
…………………………………… of Watson-Marlow Ltd.
Place and date of declaration: Watson-Marlow Ltd, 17 th August 2012
Responsible person:
Mr. David Cole
Managing Director for Watson-Marlow Ltd
Andrew Green
The information in this user guide is believed to be correct at the time of publication.
However, Watson-Marlow Limited accepts no liability for errors or omissions. Watson-
Marlow has a policy of continuous product improvement, and reserves the right to
alter specifications without notice. This manual is intended for use only with the
pump it was issued with. Earlier or later models may differ. The most up-to-date
manuals appear on the Watson-Marlow website: http://www.wmpg.com