10 start-up check list – Watson-Marlow Qdos30 User Manual
Page 16
Watson-Marlow qdos30 PROFIBUS Pump User Manual
16
10 Start-up check list
• Fit the pumphead to the drive. Refer to: 18 Pumphead replacement on page 15.
• Ensure the pumphead ports are securely fitted to the interface tubing.
• Ensure proper connection has been made to a suitable power supply.
• Ensure that the recommendations in: 8.1 General recommendations on page 15
are followed.
This manual is related to the following products: