Watson-Marlow APEX10 - Manual (Page 24)

INSTALLATION
24
•
All control cables outside the enclosure must be
shielded and have a cross sectional area
between 0.22 mm
2
and 1 mm
2
. The shielding
must be connected to earth at both ends. In
case of doubt, consult your Bredel
representative.
5.4 Lifting and moving the pump
The pump support has a lifting eye (A) for lifting and
moving the hose pump.
The complete hose pump, i.e. pumphead, gearbox and
electric motor, must be lifted using the lifting eye plus
additional support using suitably rated straps or
slings (A). For the weights, refer to §
11.1.5 .
5.5 Placing the pump
Position the pump on a horizontal surface. Use suitable
anchor bolts to attach the pump to the floor surface.
A
A
WARNING
If the pump is to be lifted ensure that all
standard lifting practices are adhered to
and carried out by qualified personnel only.