Verilink QUAD DATA (880-503319-001) Product Manual - Manual (Page 10)

Overview
1-2 Verilink QUAD DATA User Manual
Compatible
Modules
The AS3000 modules to which circuits can be built from a QUAD
DATA module are:
• An M1-3—T3 multiplexer module.
• A QUAD T1—four port T1 CSU module.
Management
Options
The QUAD DATA module is a single component of an AS3000 node.
Each AS3000 node must contain an SCM module as the node
controller. Management of the QUAD DATA module is done through
the SCM.
The SCM provides the management interface to one or more of the
following:
• A PC running the Verilink Node Manager application.
• Any computer running an SNMP management program.
• A terminal accessing the Craft (ASCII terminal) interface.
Related Verilink
Documents
For basic information on Verilink AS3000 shelves, power supplies,
and physical installation, see the manual
AS3000: The Basics.
For information on the SCM 3000 SNMP node controller module and
the Circuit Manager functions, see the
SCM User Manual .
For information on the M1-3 multiplexer module, see the M1-3 User
Manual .
For information on the QUAD T1 module, see the QUAD T1 User
Manual .