Viewing the override operation run-time, Page 11.4 – Venstar T2900 User Manual

Page 56

Text mode
Original mode

Page 11.4

Viewing the Override Operation Run-Time

Press the PROGRAM button to leave the Setup screens. If no buttons are

pressed, the display will leave the setup screens after 30 seconds.

PROGRAM

Press

This display will track the number of hours that your thermostat has
been operating in the Override mode (see page 6.6). Press the FAN
button to reset the counter.

Press

FAN

Counts the number of
hours Override has
been active. Press FAN
to reset the Override Run-
Time counter.

Note: Press the

MODE

button momentarily
to move through the
setup screens. Press
and hold the

MODE

button to move back-
wards through the
setup screens.

PROGRAM

MODE

Press the MODE button. While holding
the MODE, press the PROGRAM button
to enter Setup screens.

Press the MODE button repeatedly
until this setup screen appears.

Override

Setup