Venstar T2900 - Manual (Page 22)

Page 4.5
4
Press
MODE
Press
MODE
Press
MODE
NON-PROGRAMMABLE WITH AUTO-CHANGEOVER - If the
thermostat is configured to be a non-programmable thermostat
with Auto-Changeover, the following screens will be available by
pressing the MODE button
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Heating Only
Select the Mode by Pressing the MODE Button
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Cooling Only
AUTO will automatically select
heat or cool based on room
temperature demand.
Heating or Cooling
OFF indicates both heating
and air conditioning
systems are turned off.
Off
Operating Mode when the Thermostat
is Configured to be:
Su
70
12:00
H EAT
68
Su
70
12:00
C OOL
76
AUTO
Su
70
12:00
H EAT
C OOL
76
68
OFF
Su
70
12:00
Pm
Pm
Pm
Pm