Viewing the remote temperature sensors – Venstar T2900 User Manual
Page 103

Page 22.4
Viewing the Remote Temperature Sensors
Each sensor is programmed with a “hard-coded” address that the
thermostat “scans” in order from lowest to highest. Therefore, in
order to determine which sensor corresponds to the number on the
setup screen you will need to disconnect each sensor from the group
in order to determine which sensor number reads dashes.
Remote
Sensor #1.
Remote
Sensor #2
Remote
Sensor #3
Remote
Sensor #4
Remote
Sensor #6
Remote
Sensor #7
Press the MODE button to
return to normal operation.
PROGRAM
Remote
Sensor #5
Remote
Sensor #8
Press the MODE button. While holding the MODE,
press the PROGRAM button to enter Setup screens.
PROGRAM
MODE
Press the MODE button repeatedly
until setup step #48 appears.
MODE
22
Note: Press the
MODE
button momentarily
to move through the
setup screens. Press
and hold the
MODE
button to move back-
wards through the
setup screens.
Setup
Remote
72
48
1
Setup
Remote
68
48
2
Setup
Remote
76
48
3
Setup
Remote
80
48
4
Setup
Remote
65
48
5
Setup
Remote
72
48
6
Setup
Remote
70
48
7
Setup
Remote
73
48
8