Upsite 10013 Extended 6 x 24 Brush - Manual (Page 3)

3
Designer & Manufacturer
(888) 982-7800 www.upsite.com
Product Components (see Figure 1)
1. KoldLok Extended Raised Floor Grommet.
2. Right and Left End Caps for protecting and sealing the end of the Grommet.
3. Adhesive Mounting Kit provided as an alternative mounting method if screws cannot be
used. The kit includes seven foam strips with 2-sided adhesive backing to adhere the
Grommet to the floor and two strips of double-sided adhesive tape to mount the End
Caps to the Grommet.
4. Self-Tapping Screws are provided as the preferred method of securing the Grommet to
the floor tile.
Installation Procedure with Self-Tapping Screws:
*IMPORTANT: If the KoldLok Extended Raised Floor Grommets are being installed in an active data
center, remove the floor tile and install the Grommet outside of the active data center environment.
Following installation, return the floor tile and Grommet to the data center.
1. Position the Grommet over the cable cutout, with the flange resting on the floor tile and
Grommet filaments covering the cutout.
2. Ensure the flange does not rest on top of any cutout trim. If the Grommet cannot be
placed without resting on the cutout trim, install the Grommet with the Adhesive
Mounting Kit. See Installation Procedure with Adhesive Mounting Kit on Page 4.
3. Once the Grommet is positioned as desired, drive a self-tapping screw through the cen-
ter pre-drilled screw hole on the Grommet flange to attach the Grommet to the raised
floor.
Dimensions and Cutting Requirements Inches (W x D) Millimeters (W x D)
Item No. 10012 3”x 24” - Overall size 24” x 5.05” 610 x 128mm
Maximum cutout size sealed 24” x 4” 610 x 102mm
Usable cable area 22” x 2.5” 559 x 64mm
Product height above the raised floor 1” w/ mounting kit
installed 25mm w/ mounting kit
installed
Item No. 10013 6”x 24” - Overall size 24” x 8.08” 610 x 205mm
Maximum cutout size sealed 24” x 7” 610 x 178mm
Usable cable area 22” x 5.5” 559 x 140mm
Product height above the raised floor 1” w/ mounting kit
installed 25mm w/ mounting kit
installed