Teletronics EZPlatform - Manual (Page 25)

25
5.4.6. MAC Filtering
The MAC Address Filtering page is shown in Figure 16.
Figure 16. MAC Address Filtering page
MAC Address Filtering
MAC Address Filtering: this function allows you to precisely control which devices are allowed
to pass traffic through the WLAN interface. This feature can only be used when the WLAN
interface is working in AP mode.
ƒ Enable: when enabled, only the devices whose MAC address is listed in the table are
allowed to pass traffic through the WLAN interface
ƒ Disable: any device can pass traffic through the WLAN interface
MAC Address: enter the MAC address of the device you wish to authorize to have access to
the WLAN interface. The MAC address must be entered as octets separated by colons (e.g.:
00:60:B3:F8:C6:D4). Both lower and upper case letters are acceptable.
Nickname: here you can enter a note to remind yourself what device or location corresponds to
the MAC address entered. This field is provided for your convenience and has no impact on the
operation of the EZPlatform™.