Teac KS-1017 User Manual
Page 9
8
Kachinko System
9
Kachinko System
The KS-1017 must be removed from the case if the combined
connector is to be used.
The top flap covering the control panel and the video probe
pocket can be folded back on itself, and used as a stand to
prop the KS-1017 up at a convenient angle on a working surface.
Note that you must disconnect the video probe before closing
the flap.
Batteries
The KS-1017 uses 4 AA dry-cell or rechargeable batteries.
These are located in the battery compartment accessed using
the hinged cover at the top of the unit.
Take care that the batteries are inserted correctly with the po-
larity correct.
Never mix batteries of different types, or discarded (or partially-
discharged) and new (or freshly-charged) batteries.
Always follow the battery manufacturer’s instructions for charg-
ing rechargeable batteries. Never attempt to recharge batteries
which are not designed for this purpose.