Teac KS-1017 - Manual (Page 12)

12
Kachinko System
13
Kachinko System
Interpreting the results
1. To read the figures, press the DATA SEL. key to cycle through
the three different readings (between 1st and 2nd, and 2nd
and 3rd on the top row of the three selection indicators, and
between 1st and 3rd on the bottom).
2. The gap between the signals is shown in either milliseconds
or in frames, depending on the setting made with the
mS/FRAME switch.
If an interval is too long to be displayed (over 6 seconds),
the T.OVER indicator lights when the reading is selected and
the display shows all dashes.
3. Use your audio or video delay to slip the signals by the
appropriate amount so that the audio and video are
properly synchronized.