Teac DR-70D - Manual (Page 18)

18
TASCAM DR-70D
Category Desired action Function name Procedures, buttons used and explanation
File opera-
tions
Check file information
Home Screen w MENU w BROWSE w DATA w INFO
Use this function to check the date of recording and file size, for example.
Delete a file
Home Screen w MENU w
BROWSE
w DATA w
DELETE
You can delete files that you do not need.
Delete all files in a folder at the
same time
Home Screen w MENU w BROWSE w DATA w ALL DEL
You can delete all the files in a folder at the same time.
Unit
settings
Set the date and time
Home Screen w MENU w
OTHERS
w
DATE/TIME
Use this function to set the internal clock, which is used for the recording dates written to
files, for example.
Turn plug-in power on
Home Screen w MENU w BASIC w INPUT 1/2 SELECT w EXT POWER
Make this setting when using an external mic that requires plug-in power connected to
the EXT IN 1/2 jack.
Check information about the unit
or card
Home Screen w MENU w OTHERS w INFORMATION
Use this function to check the unit firmware version and the amount of remaining space
on the card, for example.
Change the automatic power
saving function
Automatic power saving
Home Screen w MENU w OTHERS w SYSTEM w AUTO PWR SAVE
This function automatically turns the unit off when it is not used for some time.
Change the backlight setting
Home Screen w MENU w OTHERS w SYSTEM w BACKLIGHT
Use this to change the display backlight setting.
Adjust the display contrast
Home Screen w MENU w OTHERS w SYSTEM w CONTRAST
Use this to set the contrast of the characters on the display.
Set the battery type
Home Screen w MENU w
OTHERS
w
BATTERY
Select the type of battery being used. This setting affects the accuracy of the remaining
battery display.
Set the phantom power voltage
Home Screen w MENU w MIC w PHANTOM VOLT
Sets the phantom power voltage.
Restore the unit to its default
settings
Initialize
Home Screen w MENU w
OTHERS
w
SYSTEM
w
INITIALIZE
Use this function to restore all settings to their factory defaults.
Format an SD card Format
Home Screen w MENU w OTHERS w SYSTEM w FORMAT
Use this function to format cards.
Unit
settings
Set the file name format
Home Screen w MENU w OTHERS w FILE NAME
You can change the characters used in the file names that are automatically assigned.