Teac US-2000 - Manual (Page 9)

TASCAM US-2000
9
System requirements
See the TASCAM website for updated information about
OS compatibility.
Windows
Windows XP 32-bit SP2 or later
Windows XP 64-bit SP2 or later
Windows Vista 32-bit SP2 or later
Windows Vista 64-bit SP2 or later
Supported computer system:
Windows compatible computer with a USB 2.0 port
CPU/clock: •
Pentium 4 1.4 GHz or faster
AMD Athlon 1.4 GHz or faster
(or equivalent processor)
Memory: •
512 MB or more for Windows XP 32-bit and Windows
Vista 32-bit
1 GB or more for Windows XP 64-bit and Windows Vista
64-bit
NOTE
Although this product has been checked for use with
typical computers that meet the above operating
requirements, we cannot guarantee that it will operate
with all computers that meet these requirements.
Please be aware that even under the same conditions,
processing capability may vary depending on differences
of the design and system.
Mac OS X
Supported operating system:
Mac OS X 10.4.11 or later
Mac OS X 10.5.6 or later
Supported computer system:
Apple Macintosh series equipped with a USB port as
standard equipment
CPU/clock: •
Power PC G4 1 GHz or faster, or Intel processor
Memory: •
512 MB or more
Installing the driver
In order to use the US-2000, you must install the
appropriate driver into your computer. As described below,
this is an easy process using the CD-ROM included with
the US-2000.
Driver are updated from time to time. You can download
the most recent version of the driver from the TASCAM
website .
Do not connect the US-2000 to your computer before you
have installed the driver.
CAUTION
Handle the enclosed CD-ROM with care. If the disc •
becomes scratched or dirty, your computer may
be unable to read it and the software cannot be
installed. If the disc becomes unreadable, a fee will
be charged for its replacement.
Never attempt to play the enclosed CD-ROM in a •
conventional audio CD player, as the resulting noise
may damage your speakers or your hearing.
Installing the driver for Windows
NOTE
During driver installation, a warning that “this •
software ... has not passed Windows Logo testing“
will appear. This message appears when a driver that
has not received Windows Logo testing is installed.
This message appears because the drivers for TASCAM
products have not received Windows Logo testing.
We have, however, confirmed their proper operation.
If this message appears, click Continue to proceed
with the installation.
During installation, you must connect, disconnect •
and reconnect the unit in steps 7, 8 and 9. You should
complete each of these installation steps in less than
one minute. Installation may fail if you take too much
time.
1 Confirm that the unit and the PC are not connected
by the USB cable.
2 Insert the included driver installation CD-ROM into
the PC where you will install it.
3 Click the “Install Driver” button when the screen
below appears. (If this screen does not appear
automatically, find and open the “Autorun2.exe”
program in the “Autorun” folder on the driver
CD-ROM.)
4 When the language selection screen (below) appears,
select the language you prefer and then click the
“OK” button.
3 − Installation