Teac MX-2424 Installation v1.01 User Manual
Teac Audio
Installing The MX-2424
When mounting MX-2424's on top of each other in a rack
the feet may be removed by unscrewing them.
To replace the feet:
1. Insert the fastener into the foot
2. Snap the fastener & foot back into the hole in the bottom of the MX-2424 chassis
3. Snap the screw into the fastener's hole
Multiple units can be mounted on top of each other when forced air rack ventilation is provided.
a one inch clearance is required on both sides of the MX-2424 (even in single-unit installations).
In facilities with raised computer-room style flooring, a ventilation opening in the floor is recom-
mended. In no case should the internal rack temperature ever exceed 100 degrees Fahrenheit
(43 degrees Centigrade) during operation (as measured at the rear of any MX-2424 in the system).
Document Outline
- CONNECTING THE MX-2424
- [53] Analog Multi-Track Connections
- [52] Digital Multi-Track Connections
- [55] AES/EBU Stereo Digital Audio Connections
- [54] SPDIF Connections
- [58] Remote Connection
- [56} Footswitch Connection
- [59] TL-Bus Connection
- [61] Video Sync In/Thru Connections
- [62] Net Connection
- [63] SCSI Connection
- [57] Word Clock In/Out/Thru Connections
- [51] Time Code In/Out/Thru Connections
- [60] MIDI In/Out/Thru Connections
- [64] IEC 3-Prong AC Connection